FY2-1 Hand Crank Installation
Parts and Actual Completed Product
The WHEEL and PARTS come with the Black Beauty
HAND CRANK and SCREW and Screw
Tilt the machine and place the WHEEL in position
Place the RING on top of the wheel as shown
- Loosen the screw on the metal WHEEL STOPPER
- Then place the metal WHEEL STOPPER on top of the ring (align the screw with the screw hole)
- Tighten the screw on the WHEEL STOPPER
- If you find the screw cannot be tighten all the way, loosen it again, then turn the ring 1/3 to the right, then tighten the plate with screw again until the screw tightens. completely
Make sure the screw on the WHEEL STOPPER goes all in as shown
The hand crank is installed, and make sure to tighten the screw on the bottom of the hand crank to the machine.
Video Showing Installation of Hand Crank